Trelleborg MultiFlex 3D 

First choice for small diameter underground and down pipes with diameter changes. The highly flexible material ensures easy installation and the best possible lining with multiple bends up to 90° and up to two dimensional changes. More info

• DIBt certification Z-42.3-468
• DN 30 – DN 200 (NPS 1.18” – 8”)
• Under size: 9 %
• ≥ 3.0 mm final wall thickness
• All known curing methods

Trelleborg MultiFlex 1D

First choice for small diameter underground and down pipes. The highly flexible material ensures easy installation and the best possible lining with multiple bends up to 90°.  More info

• DIBt certification Z-42.3-468
• DN 30 – DN 200 (NPS 1.18” – 8”)
• Under size: 18 %
• ≥ 3.0 mm final wall thickness
• All known curing method

Trelleborg ProLiner

Ideal for professionally executed standard installations for house connections and in building services.  More info

• DIBt certification Z-42.3-468
• DN 100 – DN 600 (NPS 4” – 24”)
• ≥ 3.0 – 6.0 mm final wall thickness
• High chemical resistance, up to 100 °C / 212 °F
• All known curing methods

Trelleborg UltraFlex 3D

Perfect for lateral pipes, two dimension changes, excellent final wall thickness, even in expanded areas, bends up to 90°.  More info

• DIBt certification Z-42.3-468
• DN 75 – DN 200 (NPS 3” – 8”)
• ≥ 3.5 – 5.0 mm final wall thickness
• All known curing methods

Trelleborg UltraFlex 1D

Perfect for lateral pipes with up to one dimension change and several bends of up to 90°.  More info

• DN 50 – DN 200 (NPS 2” – 8”)
• ≥ 3.5 – 5.0 mm final wall thickness
• PU coating
• All known curing methods

Trelleborg UltraFlex 1D PP

Perfect for rehabilitating sections with up to one dimension change and several bends of up to 90°.  More info

• DN 50 – DN 200 (NPS 2” – 8”)
• ≥ 3.5 – 5.0 mm final wall thickness
• PP coating
• High chemical resistance, up to 100 °C / 212 °F
• All known curing methods

Trelleborg Thermoliner

Thermoliner is the product for the renovation of straight sections with a maximum of one dimension change and bends up to 45°. Its PES felt carrier material has good longitudinal tensile strength, which favors precise installation when installed with an open end.  More info

• DN70 – DN300 (NPS 2,75”– 12”)
• 0 mm final wall thickness
• PU-Coating
• All known curing methods

Trelleborg VitroFlexx

VitroFlexx is the perfect product for the renovation of pipes with up to two dimensional changes and multiple bends of up to 90°, where increased demands are placed on the mechanical properties. It is available in 2-, 3-, 4- and 5-layer versions.

• DN50 – DN450 (NPS 2” – 18”)
• ≥ 2.2 – 5.5 mm final wall thickness (uniform)
• All known curing methods
• Steam curing only with calibration tube

Boldan 3D Liner SN4

Top-of-the-line transitional liner for small-diameter pipes in buildings, lightly loaded yards, and green areas. Boldan 3D Liner SN4 is a highly flexible tube, ideal for use on multiple bends up to 90° with a wrinkle-free finish.  More info

• Approved part of the Boldan In-House Lining System® Certificate
• DN 30 – DN 150 (NPS 1.18” – 6”)
• 0 mm final wall thickness
• PU coating
• All known curing methods

Boldan 1D Liner SN4

High-quality One-Size liner for relining waste and rainwater sewer pipes inside buildings, lightly loaded yards, and green areas. The highly flexible material ensures easy installation and the best possible lining with multiple bends up to 90°.

• Approved part of the Boldan In-House Lining System® Certificate
• DN 50 – DN 150 (NPS 2” – 6”)
• 0 mm final wall thickness
• PU coating
• All known curing methods