Home  ›  Products  ›  Pipe & Cable Locator  ›  Flexrod
Radiodetection · Sonde Insertion

Flexrod Fibreglass Push-Rod

A high-quality fibreglass rod in a polypropylene sleeve, wound onto a sturdy steel frame with a manual brake. It pushes a Radiodetection sonde deep into non-metallic pipes, drains and ducts so you can trace the line, find blockages or thread a draw string. Eight configurations, four rod diameters. Pick the reach and flexibility your job needs.

Not sure which?Use the configurator below. Choose a diameter and length and we'll show the exact part number.
Radiodetection Flexrod fibreglass push-rod
4Rod diameters, from 4.5 mm to 11 mm
300 mMaximum single-rod reach
8Length & gauge configurations
PP-sleevedResists abrasion, solvents, oils & acids
Configure Your Flexrod

Two choices, one part number.

Thinner rods bend tighter for small pipes; thicker rods push further. Pick a diameter, then a length.

1 Rod diameter
2 Rod length

The everyday all-rounder, the right balance of push and flexibility for most drain and sewer tracing work.

Rod length50 m164′
Weight8 kg18 lb
Min. bend radius250 mm10″
Sonde threadM6 male6.7 mm rod
Order code10/FLEXRODF50-7
Full Range

Every configuration at a glance.

All eight Flexrod builds side by side. Additional rod lengths and thicknesses may be available on request.

Rod diameterLengthWeightMin. bend radiusConnectionPart number
4.5 mm0.18″50 m (164′)5.0 kg (11 lb)140 mm (6″)M5 male thread10/FLEXRODF50-4.5
80 m (263′)5.5 kg (12 lb)10/FLEXRODF80-4.5
6.7 mm0.26″50 m (164′)8 kg (18 lb)250 mm (10″)M6 male thread10/FLEXRODF50-7
100 m (328′)11 kg (24 lb)10/FLEXRODF100-7
150 m (492′)14 kg (31 lb)10/FLEXRODF150-7
9 mm0.35″60 m (197′)26 kg (57 lb)310 mm (12″)M12 male thread10/FLEXRODF60
120 m (394′)35 kg (77 lb)10/FLEXRODF120
11 mm0.43″300 m (984′)66 kg (146 lb)390 mm (15″)M12 male thread10/FLEXRODF300
In The Field

What the Flexrod is for.

A push-rod does two jobs: it carries a sonde to where a locator can find it, and it feels its way along a line you cannot see.

01

Insert & push a sonde

Thread a Radiodetection sonde onto the rod tip and propel it along a non-metallic pipe, drain or duct so a locator can pinpoint it from the surface.

02

Trace the pipe path

Follow the sonde as it travels to map exactly where a buried, non-conductive line runs, and how deep it sits, before you dig.

03

Find the blockage

Push until the rod meets resistance, then locate that point on the surface to mark a collapse, root intrusion or blockage for excavation.

04

Thread draw strings

Use the rod on its own to feed a draw string or pull cable through an empty duct, ready to install services.

Built To Last

Fibreglass core, polypropylene skin.

The glass-fibre rod gives very good bend strength and springs back straight, while the polypropylene sleeve shrugs off abrasion and most solvents, oils and acids inside a dirty pipe. A sturdy steel frame with a manual brake keeps long rods under control as you feed them out and reel them back.

  • Durable, high-visibility rod with very good bend strength
  • Polypropylene sleeve resists abrasion, solvents, oils & acids
  • Steel frame with a manual brake for controlled feed-out
  • Male thread tip accepts Radiodetection sondes
CoreGlass-fibre rod

Springy, high bend-strength core that pushes without kinking.

SleevePolypropylene jacket

Smooth, chemical- and abrasion-resistant skin that glides through pipe.

FrameSteel reel + brake

Controls feed-out and holds the rod steady at working depth.

Specifications

Technical details

The Flexrod pairs with a Radiodetection sonde and locator. Ask us to match the rod, sonde and locator into one working kit.

BrandRadiodetection
Product typeFibreglass push-rod for sonde insertion
ConstructionGlass-fibre rod in a polypropylene sleeve, steel frame
FrameSturdy steel frame with manual brake
Rod diameters4.5 mm · 6.7 mm · 9 mm · 11 mm
Lengths50 m up to 300 m (additional lengths on request)
Sonde connectionM5 / M6 / M12 male thread (by diameter)
ResistanceAbrasion, most solvents, oils and acids
Best forNon-metallic pipes, drains, sewers and empty ducts
SupportLocal training, calibration & repair in Malaysia
Completes The System

Pairs with a Radiodetection sonde.

The rod carries the sonde; the sonde emits the signal a locator follows. Thread one of these onto the Flexrod tip to suit the pipe size and depth.

Configure Your Kit

Match the right Flexrod to your job.

Tell us the pipe size, the run length and the sonde you use, and RD-Palmer will supply the correct rod, connection thread and sonde as one ready-to-work kit, with local training and calibration across Malaysia.

See Locator Range
RD-Palmer AssistantProduct & sales assistant

Hi, I'm RD-Palmer's product assistant. Ask me about our locators, GPR, leak detection or pipeline equipment, or I can connect you with our sales team.

What products do you have?
I need a quote
Do you offer training?
AI can make mistakes, so please confirm important details with our team. Chats may be logged for follow-up.